Industrial Air Conditioning Service In Redding, Anderson, Cottonwood, CA And Surrounding Areas

Industrial air conditioning, or “commercial” as it is often called, is the process of providing and controlling the flow of fresh air in a building to maintain work conditions for comfort and safety. The idea behind such systems is to provide a comfortable environment for both people and equipment by treating and circulating outside air through filtration, heating or cooling, humidification or dehumidification, pressurization, and where necessary, odor removal.

There are several types of industrial air conditioning systems available to meet the needs of any process application. The most common types are kiln cooling for cement plants; heat recovery from flue gases in coal-fired generating stations; natural draft cooling towers; and cooling towers using recirculated water.

Why should you schedule regular industrial air conditioning maintenance?

Because improperly controlled atmospheres can be hazardous, it is important to have your system checked regularly. Air conditioning units should be inspected quarterly and immediately after any heat-producing event such as a fire or an electrical outage.

If you experience any of the following problems, call our office today for industrial air conditioning services in Redding and Red Bluff, CA, and surrounding areas:

  • An ammonia smell at cooling tower discharge
  • High condensate return
  • A sudden drop in capacity or increased electrical usage

Air-O Services technicians install, service, and repair commercial air conditioning systems daily. With over 45 years of experience, you can be confident that your system will be treated by experienced professionals.

Call today for an estimate!

When might you need industrial air conditioning repairs?

If your equipment is visibly dirty, there are temperature fluctuations within the system, or you are experiencing humidity problems, it’s time to call Air-O Services for industrial air conditioning services.

Common air conditioning repairs that require service include:

  • Compressor Replacement
  • Contactor and Overload Repair or Replacement
  • Evaporator Coil Freeze-Up and Water Hammer
  • Thermostat and Control Problems (repair or replacement)

The common causes of these system malfunctions include voltage irregularities, faulty installation, poor maintenance, low refrigerant levels, and low airflow.

Contact Air-O Services for industrial air conditioning repairs in Redding and Red Bluff, CA, and surrounding areas.

When would you need to replace my industrial air conditioning system?

You should consider replacing your industrial air conditioning system when:

  • You can see signs of corrosion or leaks inside or outside of the system.
  • You have a cracked heat exchanger or a corroded heat transfer surface.
  • The fan does not work properly, and the system cannot “break its own vacuum” to pull in dry air from outside.
  • The cooling tower pump or fan motor is faulty or excessively noisy.

If your industrial air conditioning system is experiencing any of these issues, it is best to contact our professional team as soon as possible for examination and evaluation in Redding and Red Bluff, CA, and surrounding areas.

In addition to repairing or replacing your system, regular maintenance from a qualified service provider will prolong the life of your HVAC equipment and ensure that you avoid costly malfunctions.

Contact Air-O Services today for your industrial air conditioning services needs!